Rowlinson 10ft Woodvale Metal Sheds - Woodgrain Effect, Optional Installation

Not your postcode?
Setting the first half of your postcode shows you the full choice in your area.
In a moment you may be asked to share your location. Please allow this so that we can show you the full choice in your area (inclusive of delivery charges). You may also set your location manually using the button above.

Click this messge to hide it.
Rowlinson 10ft Woodvale Metal Sheds - Woodgrain Effect, Optional Installation
1
2
3
4
5
6
Play Video
Play Video
Pictures 1 and 2 shows the 10'x6' wood-effect metal shed. Picture 3 show the 10x8, picture 4 shows the 10x12 shed. Pictures 5 and 6 show close up views.

Summary:

These metal sheds are approximately 10'x6', 10'x8' or 10'x12' and are supplied with attractive woodgrain wall panels and contrasting coloured trims and fascias. Heavier than most other comparable metal sheds, all framing and cladding is hot dip galvanized steel. The cladding and doors are resin coated on both sides. Sliding double doors are included in the 10' wide wall with lockable handles. Strong foundation rails are also included. Options include a timber floor and a base anchor kit to ensure that your shed is fixed down securely. All fixings and instructions are included. An optional installation service is available on sheds purchased with the internal timber floor.

Back to the Top
  • Hot dip galvanized steel framing
  • Hot dip galvanized steel cladding panels with a tough epoxy resin coating inside and woodgrain foil laminate outside
  • Horizontal wall panels give an appearance similar to weatherboard cladding
  • Woodgrain foil laminate to external surfaces
  • Attractive and durable woodgrain finish which resembles the appearance of natural wood
  • Woodgrain finish to external wall cladding
  • Contrasting colour to gables, door frame and other trims
  • Pale colour to all internal cladding
  • Double sliding doors in the 10'3" wide front wall
  • Pair of door handles pre-drilled with holes to suit most padlocks
  • Horizontal and diagonal door framing
  • Cladding sheets are corrugated for extra strength
  • Profiled corner posts to provide a strong and waterproof corner joint
  • Foundation rails
  • External ridge height approximately 6'10" (2090mm)
  • Eaves height approximately 5'11" (1810mm)
  • Door height approximately 5'9" (1760mm)
  • Door opening width approximately 4'8" (1410mm)
  • This shed is easy to deliver if access is restricted - all sections are designed to pass through a normal single door

10'x6' Shed

  • External roof size approximately 10'3" wide x 5'11" deep (3130mm x 1810mm)
  • Minimum base size approximately 10'1" wide x 5'9" deep (3070mm x 1750mm)
  • Internal size approximately 9'10" wide x 5'6" deep (3000mm x 1680mm)

10'x8' Shed

  • External roof size approximately 10'3" wide x 7'11" deep (3130mm x 2420mm)
  • Minimum base size approximately 10'1" wide x 7'9" deep (3070mm x 2360mm)
  • Internal size approximately 9'10" wide x 7'6" deep (3000mm x 2290mm)

10'x12' Shed

  • External roof size approximately 10'3" wide x 12'2" deep (3130mm x 3700mm)
  • Minimum base size approximately 10'1" wide x 11'11" deep (3070mm x 3640mm)
  • Internal size approximately 9'10" wide x 11'9" deep (3000mm x 3570mm)

GALVANIZED STEEL CLADDING: These great value buildings are made with galvanized steel throughout. All framing and cladding is hot dip galvanized steel. This is a process by which steel is coated with zinc to protect it from corrosion. The cladding is subsequently coated with epoxy resin, partly to protect the zinc coating itself and partly to add colour. The factory finish is described as primer although a top coat is not normally needed. The combination of a zinc coating with epoxy resin provides durable protection even if the surface is scratched.

STRONG FRAMING: In common with all other steel buildings, including even the largest sports stadia, retail superstores and warehouses, steel cladding sheets are surprisingly thin. The strength of steel buildings is provided by the frame, although the corrugations of the cladding sheets do provide a degree of extra strength. These metal sheds feature strong galvanized steel framing members and the completed frame is rigid.

DOOR SIZES - HEIGHT AND WIDTH: The door height listed above is the approximate head clearance height. The actual clear height of the opening is approximately 1" or 25mm less due to the door threshold. The approximate door opening width listed above is the minimum clearance which is safe to use when considering whether to purchase this building. We recommend allowing at least another 3" or 75mm all round any large objects to ensure easy access on a regular basis. In practice the actual opening width may be a few inches wider if the doors are set up with care.

SIZES - DEPTH AND WIDTH: The external roof sizes are listed alongside the price. The first dimension listed is the width and the second dimension is the depth. The width refers to the angled gable walls at the front and rear including the door wall. The depth refers to the side walls. The external wall sizes may be smaller.

Back to the Top
In stock now - log cabins, metal sheds, greenhouses, gazebos, garden furniture